17 09, 2020

Getting Serious About Cultivation Equipment: Cannabis Buckers

It’s time to replace your inefficient, hard-to-use, and non-ergonomic cannabis bucker. 

02 09, 2020

Find the Right Type of Cannabis or Hemp Trimmer for your Cultivation Facility

Cannabis trimmers come in many shapes and sizes. Here’s what you need to know before making an investment.

There are a wide variety of cannabis[...]

19 08, 2020

Prepping For Your Cannabis & Hemp Harvest

There are always a few indicators that summer is waning; days are getting shorter, there’s a layer of dew on the lawn in the morning, and our[...]

22 07, 2020

3 Ways to Optimize Your Cannabis or Hemp Trimming Workflow

With any new technology there can be a bit of a learning curve, and commercial-scale trimming is no different. Sure, you’re an old-hand at using a[...]

29 06, 2020

How 6-Point Inspections Save The Day

Over the years we’ve learned a thing or two, and we’re only too happy to share these little nuggets of wisdom with you! Early on we discovered[...]

22 06, 2020

9 tips to optimize your cannabis or hemp bucking workflow

Besides trimming, bucking is the most critical point in the cannabis or hemp harvesting workflow. If you’re using an automated bucker for the[...]

08 06, 2020

Double Dutch Farms - Mobius M210 Mill Case Study

Double Dutch Farms is a Tier 3 cannabis cultivator located in rural Yakima County, Washington. Their horticulture heritage goes back many[...]

01 06, 2020

Considering a T-Zero? Consider this!

Ever since Twister announced their claim of 600 lbs/hr, we’ve been dying to see it. Given our knowledge of trim technology, we had good reason to[...]

19 05, 2020

Why Use Conveyors With Your Cannabis and Hemp Trimmer

The Mobius M108S Trimmer comes with an Infeed Hopper and an Outfeed Chute, which work great to a point. To maximize quality and volumes, you need[...]

05 05, 2020

Why Mathing Out Theoretical Through-Puts Isn't Honest or Even Helpful

Mobius has a small hang-up; we NEVER over-promise and under-deliver. We believe in first educating ourselves, then educating customers, letting[...]